Programming windldr (modbus tcp server) -8, Tcp c – IDEC MicroSmart Pentra User Manual
Page 96
9: M
ODBUS
TCP C
OMMUNICATION
9-8
W
EB
S
ERVER
CPU M
ODULE
U
SER
’
S
M
ANUAL
FC9Y-B1278
Programming WindLDR (Modbus TCP Server)
In order to use Modbus TCP server, configure the Modbus TCP server in the Function Area Settings dialog box and then
download the user program to the CPU module.
1.
From the WindLDR menu bar, select Configuration > Connection Settings.
The Function Area Settings dialog box appears.
2.
Select Modbus TCP Server as the communication mode for the server connection 1.
The Modbus TCP Server dialog box appears.
3.
Configure the parameters and click on OK button.
4.
Download the user program to the CPU module.
Now, programming for the Modbus TCP server is complete. The specification and setting of each parameter are the same
with Modbus slave communication. For details about the Modbus slave communication, see chapter 12 of FC5A user’s
manual basic volume.