IDEC MicroSmart Pentra - Manual (Page 76)

6: R EMOTE H OST L IST
6-2 W EB S ERVER CPU M ODULE U SER ’ S M ANUAL FC9Y-B1278
2. Click New button or select an existing remote host and click Edit button.
The Remote Host dialog box appears.
IP Address: Specify the remote host with an IP address.
Host Name: Specify the remote host with a host name.
Port Number: Specify the port number of the remote host.
Comment: The comment for the remote host can be assigned. The contents or the length of the comment has no effect
on the CPU module operation.
3. Configure the parameters in the Remote Host dialog box and then click on Add button.
A new remote host will be added in the Remote Host List dialog box. If you want to add additional remote hosts,
repeat the same procedure. After adding remote hosts has been completed, click on Close button.
4. If you want to delete an unused remote host, select that remote host in the Remote Host List dialog box and click on
Delete button.
Once a remote host is deleted, the remote host numbers of the following remote hosts are changed. As a result, the
functions referring to those remote hosts, such as PING instructions, Modbus TCP client, or User communication
client, will be affected,
Note: The PING instruction pings a remote host that has the specified IP address or host name. The port number of the remote host
has no effect on the operation of the PING instruction.