Removing the terminal blocks, Removing the terminal blocks -9 – IDEC MicroSmart Pentra User Manual
Page 37
W
EB
S
ERVER
CPU M
ODULE
U
SER
’
S
M
ANUAL
FC9Y-B1278
3-9
3: I
NSTALLATION
AND
W
IRING
Removing the Terminal Blocks
This section describes the procedures for removing the terminal blocks from slim type CPU modules FC5A-D16RK1, FC5A-
D16RS1, FC5A-D12K1E and FC5A-D12S1E.
1.
Before removing the terminal blocks, disconnect all
wires from the terminal blocks.
Remove the shorter terminal block on the left first,
then remove the longer one on the right.
2.
When removing the longer terminal block, hold the
center of the terminal block, and pull it out straight.
3.
Do not pull one end of the longer terminal block,
otherwise the terminal block may be damaged.
• Turn off the power to the Web server CPU module before installing or removing the terminal blocks to
prevent electrical shocks.
• Use the correct procedures to remove the terminal blocks, otherwise the terminal blocks may be damaged.
Caution