IDEC MicroSmart Pentra - Manual (Page 56)

4: O PERATION B ASICS
4-10 W EB S ERVER CPU M ODULE U SER ’ S M ANUAL FC9Y-B1278
3. Enter I0 in the Tag Name field, and click OK.
A NO contact of input I0 is programmed in the first column of the first ladder line.
Next, program the ANDN instruction by inserting a NC contact of input I1.
4. From the WindLDR menu bar, select Home > Basic > B (Normally Closed).
5. Move the mouse pointer to the second column of the first ladder line where you want to insert a NC contact, and click
the left mouse button.
The Normally Closed dialog box appears.
6. Enter I1 in the Tag Name field, and click OK.
A NC contact of input I1 is programmed in the second column of the first ladder line.
At the end of the first ladder line, program the OUT instruction by inserting a NO coil of output Q0.
7. From the WindLDR menu bar, select Home > Basic > OUT (Output).
8. Move the mouse pointer to the third column of the first ladder line where you want to insert an output coil, and click
the left mouse button.
Note: Another method to insert an instruction (either basic or advanced) is to type the instruction symbol, OUT, where you want to
insert the instruction.
The Output dialog box appears.
9. Enter Q0 in the Tag Name field, and click OK .
A NO output coil of output Q0 is programmed in the right-most column of the first ladder line. This completes
programming for rung 1.