IDEC MicroSmart Pentra User Manual
Page 57
W
EB
S
ERVER
CPU M
ODULE
U
SER
’
S
M
ANUAL
FC9Y-B1278
4-11
4: O
PERATION
B
ASICS
Continue programming for rungs 2 and 3 by repeating similar procedures.
A new rung is inserted by pressing the Enter key while the cursor is on the preceding rung. A new rung can also be
inserted by selecting Home > Append > Append a Rung.
When completed, the ladder program looks like below.
The ladder program can be checked whether it contains any user program syntax error.
10.
From the menu bar, select Home > Convert (above Program).
When the instruction symbols are connected correctly, conversion is completed successfully. If any error is found, the
errors are listed on the screen. Then, make corrections as necessary.
Now, save the file with a new name.
11.
Select the WindLDR application button at the upper-left corner of the WindLDR screen, followed by Save, and type
TEST01 in the File Name field. Change the Folder or Drive as necessary.
To insert a new ladder line
without creating a new rung,
press the down arrow key when
the cursor is on the last line or
press the right arrow key when
the cursor is at the right-most
column of the last line.