IDEC MicroSmart Pentra - Manual (Page 64)

5: F UNCTION A REA S ETTINGS
5-4 W EB S ERVER CPU M ODULE U SER ’ S M ANUAL FC9Y-B1278
Network Settings
This section describes the network settings of the Web server CPU module.
Applications
The network settings are configured to utilize functions that use the Ethernet port of the Web server CPU module.
Description of Functions
The network settings can be configured in a similar manner to the network settings of the PC. It is also possible to
configure the network settings using special data registers. The Web server CPU module supports DNS client, and
network devices to which the Web server CPU module communicates can be specified using host names.
Programming WindLDR
1. Select Configuration from the WindLDR menu bar, and then click Network Settings.
The Function Area settings dialog box appears.
Host Settings
Specify the host name of the Web server CPU module. A maximum of 15 ASCII characters can be entered.
IP Settings
Specify the IP address, subnet mask, and default gateway.
DNS Settings
Specify the preferred DNS server and alternate DNS server. DNS server settings are required when the Web server CPU
module communicates with remote hosts using its host names.