Yokogawa FVX110 - Manual (Page 130)

<Appendix 4. Arithmetic (AR) Block>
A4-7
IM 01S01C01-01EN
Relative
Index
Index
AR1
Index
AR2
Parameter
Write
Mode
Valid
Range
Initial
Value
View
Description / Remarks
1 2 3 4
13 17513 17613 INPUT_
OPTS
0 2 Determines whether an input is used as a “good”
input when the input status is "bad" or “uncertain.”
Bit Function
0 Handles IN as “good” input if its status
is “uncertain.”
1 Handles IN_LO as “good” input if its
status is “uncertain.”
2 Handles IN_1 as “good” input if its
status is “uncertain.”
3 Handles IN_1 as “good” input if its
status is “bad.”
4 Handles IN_2 as “good” input if its
status is “uncertain.”
5 Handles IN_2 as “good” input if its
status is “bad.”
6 Handles IN_3 as “good” input if its
status is “uncertain.”
7 Handles IN_3 as “good” input if its
status is “bad.”
8 to 15 Reserved
14 17514 17614 IN 0 5 Input block.
15 17515 17615 IN_LO 0 5 Input for a low-range indicator.
This is used for the RANGE EXTENSION
FUNCTION.
16 17516 17616 IN_1 0 5 Auxiliary input 1
17 17517 17617 IN_2 0 5 Auxiliary input 2
18 17518 17618 IN_3 0 5 Auxiliary input 3
19 17519 17619 RANGE_HI 0 4 High limit for switching to a high-range indicator by
the RANGE EXTENSION FUNCTION.
20 17520 17620 RANGE_LO 0 4 Low limit for switching to a low-range indicator by
the RANGE EXTENSION FUNCTION.
21 17521 17621 BIAS_IN_1 0 4 IN_1 bias
22 17522 17622 GAIN_IN_1 0 4 IN_1 gain
23 17523 17623 BIAS_IN_2 0 4 IN_2 bias
24 17524 17624 GAIN_IN_2 0 4 IN_2 gain
25 17525 17625 BIAS_IN_3 0 4 IN_3 bias
26 17526 17626 GAIN_IN_3 0 4 IN_3 gain
27 17527 17627 COMP_HI_
LIM
+INF 4 High limit of compensation factor f.
28 17528 17628 COMP_LO_
LIM
-INF 4 Low limit of compensation factor f.