Yokogawa FVX110 - Manual (Page 49)

<7. Explanation of Basic Items>
7-6
IM 01S01C01-01EN
NOTE
DISP_PAGE_INFO does not display numbers
of function blocks whose inputs are valid. It
only displays the numbers of total inputs that
are valid, which do not necessarily correspond
to input signal numbers and page numbers
displayed by the minute of function blocks.
Example: When IN_01, IN_03, IN_04 inputs
are valid for the function block of
the VALID_CON_SUMMARY, page
number information is displayed as
1/3, 2/3 and 3/3.
When DISP_PAGE_INFO is 0: Knob link, page
information is displayed only when switching
screens and disappears after a few seconds.
Page information is displayed at all times when
DISP_PAGE_INFO is set to 1: Active and displays
information for highlighted pages when DISP_
PAGE_INFO is set to 2: Active (Reverse).
Table 7.3 Screen displaying cycle
Seting of DISPLAY_CYCLE
0:
Auto
1:
0.5sec
2:
1.0sec
3:
2.0sec
4:
4.0sec
Ambient
Temperature
>
-10 ˚C
≤
-10 ˚C
Object Parameter Setting Time
Scan mode - 0.5 sec 5 sec 0.5 sec 1 sec 2 sec 4 sec
Flashing cycle of comm.
Signal
- 1 sec 10 sec 1 sec 2 sec 4 sec 8 sec
Display cycle of lower field - 1 sec 5 sec 0.5 sec 1 sec 2 sec 4 sec
Main Tag Scrolling speed
()is scroll starting time
MAIN_TAG_SCROLL 1:Active
0.25
sec
(2 sec)
5 sec
(10 sec)
0.5sec
(1 sec)
1 sec
(2 sec)
2 sec
(4 sec)
4 sec
(8 sec)
Scroll bar moving speed
(Display out time for 2:Knob
link)
V_SCROLL_BAR
1:Active 0.5 sec 5 sec 0.5 sec 1 sec 2 sec 4 sec
2:Knob link 4 sec 5 sec 4 sec 4 sec 4 sec 4 sec
Display cycle of
Squawk
SQUAWK 1:Squawk 0.5 sec 5 sec 0.5 sec 1 sec 2 sec 4 sec
Display action
after backlight off
DISP_QUIET_MODE 1:Turn page cyclic 1 sec 5 sec 0.5 sec 1 sec 2 sec 4 sec
Display out time of
Page number information
DISP_PAGE_INFO 0:Knob link 4 sec 5 sec 4 sec 4 sec 4 sec 4 sec
Setting screen displaying cycle (DISPLAY_
CYCLE)
Select from AUTO, 0.5 sec, 1.0 sec, 2.0 sec, or
4.0 sec for screen displaying cycle. This cycle
determines the displaying cycle in scan mode,
displaying cycle of indication in the lower display
field, scroll bar movement cycle and cycle of
communication icon flashing. When set to AUTO,
displaying cycle listed above are automatically set
according to ambient temperature where FVX110
installed (-10 °C is the border of temperature)
Displaying cycle is listed in Table 7.3.
NOTE
When the ambient temperature where FVX110
installed is very low, Please set the DISPLAY_
CYCLE to AUTO or more than 2.0 sec.
NOTE
Please don’t charge DISPLAY_CYCLE setting
during squawk. It will be cause of stopping
squawk indication.