Yokogawa FVX110 - Manual (Page 62)

<8. Explanation of Basic Items (switching displays)>
8-1
IM 01S01C01-01EN
8. Explanation of Basic Items
(switching displays)
Turn the scroll knob on the outside of the case to
switch displays. Display switching on the FVX110
is of two modes depending on the speed of turning
the scroll knob. Single scroll mode, when one
display is switched to another, or continuous scroll
mode (scan mode) when displays are switched
continuously during a set cycle. By changing the
turning direction of the scroll knob, you can scroll
forward or backward through the displays.
F0801.ai
Scroll knob
Figure 8.1 Scroll knob for switching displays
NOTE
Long continuous use during high or low
temperatures may reduce visibility. Should this
happen, replace the indicator at the earliest
opportunity.
NOTE
Notes for scroll knob operation
• Do not use a spanner, wrench or other tools
for turning the scroll knob as it could damage
the knob. Turn the scroll knob only by hand.
8.1 Single Scroll Mode
To scroll only one display, turn the scroll knob about
90° (Single scroll mode). An arrow icon (▲ or ▼)
indicating the direction the scroll knob is turned will
appear in the lower right corner of the display.
F0802.ai
Figure 8.2 Screen display during single display
switching
NOTE
Turning the scroll knob 90° is only rough
description. Thus even if a 90° turn of the scroll
knob fails to switch the displays, this is not a
malfunction.