Yokogawa FVX110 - Manual (Page 77)

<12. Parameter Lists>
12-4
IM 01S01C01-01EN
Relative
Index Index
Parameter Name Factory Default Write
Mode
Explanation
86 1086 FD_CHECK_PRI 0 AUTO Indicates the FD_CHECK_ALM priority for an alarm.
87 1087 FD_SIMULATE AUTO A parameter for simulating an alarm.
88 1088 FD_RECOMMEN_ACT 0 — Indicates procedures for handling essential alarms.
89 1089 FD_EXTENDED_ACTIVE_1 0 — A parameter serving as a starting point for alarms handled by
FF-912.
90 1090 FD_EXTENDED_ACTIVE_2 0 — A parameter serving as a starting point for alarms handled by
FF-912.
91 1091 FD_EXTENDED_ACTIVE_3 0 — A parameter serving as a starting point for alarms handled by
FF-912.
92 1092 FD_EXTENDED_ACTIVE_4 0 — Not used by the FVX110.
93 1093 FD_EXTENDED_ACTIVE_5 0 — Not used by the FVX110.
94 1094 FD_EXTENDED_ACTIVE_6 0 — Not used by the FVX110.
95 1095 FD_EXTENDED_ACTIVE_7 0 — Not used by the FVX110.
96 1096 FD_EXTENDED_ACTIVE_8 0 — Not used by the FVX110.
97 1097 FD_EXTENDED_MAP_1 0x0748FFFF AUTO A parameter set by the user as a mask from DEVICE_
STATUS_1 to FD_EXTENDED_ACTIVE_1.
98 1098 FD_EXTENDED_MAP_2 0xE000EEEE AUTO A parameter set by the user as a mask from DEVICE_
STATUS_2 to FD_EXTENDED_ACTIVE_2.
99 1099 FD_EXTENDED_MAP_3 0xFF0EF8FF AUTO A parameter set by the user as a mask from DEVICE_
STATUS_3 to FD_EXTENDED_ACTIVE_3.
100 1100 FD_EXTENDED_MAP_4 AUTO Not used by the FVX110.
101 1101 FD_EXTENDED_MAP_5 AUTO Not used by the FVX110.
102 1102 FD_EXTENDED_MAP_6 AUTO Not used by the FVX110.
103 1103 FD_EXTENDED_MAP_7 AUTO Not used by the FVX110.
104 1104 FD_EXTENDED_MAP_8 AUTO Not used by the FVX110.
105 1105 PRIVATE_1 — Not used by the FVX110.
106 1106 PRIVATE_2 — Not used by the FVX110.
107 1107 PRIVATE_3 — Not used by the FVX110.
108 1108 PRIVATE_4 — Not used by the FVX110.
109 1109 PRIVATE_5 — Not used by the FVX110.
110 1110 PRIVATE_6 — Not used by the FVX110.
111 1111 PRIVATE_7 — Not used by the FVX110.
112 1112 PRIVATE_8 — Not used by the FVX110.
113 1113 PRIVATE_9 — Not used by the FVX110.
114 1114 PRIVATE_10 — Not used by the FVX110.
115 1115 PRIVATE_11 — Not used by the FVX110.
12.2 LCD Transducer Block
Relative
Index Index
Parameter Name Factory Default Write
Mode
Explanation
0 2000 Block Header TAG : "LTB" "Block
Tag
=O/S"
Information on this block such as Block Tag, DD Revision,
Execution Time, etc.
1 2001 ST_REV - AUTO Describes the revision level of parameters for setting the
transducer block. The revision is updated when set values
are changed. This parameter is used to check for parameter
changes.
2 2002 TAG_DESC Null AUTO A universal parameter intended for storing comments describ-
ing tag data.
3 2003 STRATEGY 1 AUTO A universal parameter used by the high-level system to iden-
tify function blocks.
4 2004 ALERT_KEY 1 AUTO Key information used to identify the location at which an alert
occurred. Generally, this parameter is used by a high-level
system to identify specific areas in a plant that are under the
control of specific operators to distinguish necessary alarms
only. This is a universal parameter.