Yokogawa FVX110 - Manual (Page 83)

<12. Parameter Lists>
12-10
IM 01S01C01-01EN
Relative
Index Index
Parameter Name Factory Default Write
Mode
Explanation
97 2097 IN11_SUB_TAG BLK01.OUT AUTO Use the Sub Tag for input 11. Use as a memo field and set the
information to be displayed after MAIN_TAG information in
order to indentify instruments. See block names, parameter
names and other information for setup examples.
98 2098 IN11_SCALE 100.0
0.0
1000
2
AUTO Sets scaling, units and number of decimal places for display-
ing bar graphs of input 11.
99 2099 IN12_MAIN_TAG PD_Tag12 AUTO Use to set the Main Tag for input 12. Use as a memo field
and set the information you most want to display in order to
indentify instruments. See PD_TAG connected devices and
other information for setup examples.
100 2100 IN12_SUB_TAG BLK01.OUT AUTO Use the Sub Tag for input 12. Use as a memo field and set
the information to be displayed after MAIN_TAG information
in order to indentify instruments. See block names, parameter
names and other information for setup examples.
101 2101 IN12_SCALE 100.0
0.0
1000
2
AUTO Sets scaling, units and number of decimal places for display-
ing bar graphs of input 12.
102 2102 IN13_MAIN_TAG PD_Tag13 AUTO Use to set the Main Tag for input 13. Use as a memo field
and set the information you most want to display in order to
indentify instruments. See PD_TAG connected devices and
other information for setup examples.
103 2103 IN13_SUB_TAG BLK01.OUT AUTO Use the Sub Tag for input 13. Use as a memo field and set
the information to be displayed after MAIN_TAG information
in order to indentify instruments. See block names, parameter
names and other information for setup examples.
104 2104 IN13_SCALE 100.0
0.0
1000
2
AUTO Sets scaling, units and number of decimal places for display-
ing bar graphs of input 13.
105 2105 IN14_MAIN_TAG PD_Tag14 AUTO Use to set the Main Tag for input 14. Use as a memo field
and set the information you most want to display in order to
indentify instruments. See PD_TAG connected devices and
other information for setup examples.
106 2106 IN14_SUB_TAG BLK01.OUT AUTO Use the Sub Tag for input 14. Use as a memo field and set
the information to be displayed after MAIN_TAG information
in order to indentify instruments. See block names, parameter
names and other information for setup examples.
107 2107 IN14_SCALE 100.0
0.0
1000
2
AUTO Sets scaling, units and number of decimal places for display-
ing bar graphs of input 14.
108 2108 IN15_MAIN_TAG PD_Tag15 AUTO Use to set the Main Tag for input 15. Use as a memo field
and set the information you most want to display in order to
indentify instruments. See PD_TAG connected devices and
other information for setup examples.
109 2109 IN15_SUB_TAG BLK01.OUT AUTO Use the Sub Tag for input 15. Use as a memo field and set
the information to be displayed after MAIN_TAG information
in order to indentify instruments. See block names, parameter
names and other information for setup examples.
110 2110 IN15_SCALE 100.0
0.0
1000
2
AUTO Sets scaling, units and number of decimal places for display-
ing bar graphs of input 15.
111 2111 IN16_MAIN_TAG PD_Tag16 AUTO Use to set the Main Tag for input 16. Use as a memo field
and set the information you most want to display in order to
indentify instruments. See PD_TAG connected devices and
other information for setup examples.