Yokogawa PC-Based MX100 - Manual (Page 125)

5-4 IM MX100-01E
Dual Save Function (When Using the PC Software)
• Normal Operation
Backup
FileNo.=0 FileNo.=1
Info
Backup
ON
Idle
Measure
Start Stop
Backup
OFF
Record
(Start)
Record
(Stop)
Measure
Idle
(GetData)
Mode
Command
Data
CF Write
CF File
(60 s)
PC
Software
Recording
operation Recording
starts
Recording
stops
Save on PC
Save on CF
Start New file Stop
Connects (Monitor display) Disconnects
• Operation Mode Retention/Auto Restore
Power
OFF ON
FileNo.=0 FileNo.=1
Info
Backup
ON
Idle Measure
Start Stop
Backup
OFF
Measure
Measure
Idle
(GetData)
(60 s)
Mode
Backup Backup
Auto
restore
Command
Data
CF Write
CF File
PC
Software
Abnormality
Save on PC
Save on CF
Start New file Stop
Recording
operation Recording
starts
Recording
stops
Replenish
lost data
Connects (Monitor display) Disconnects
No data
displayed
Note
When using the MX100 Standard Software, the data saved to the PC and CF card depends on
the following.
Setting
Screen and Items Data saved to PC Data saved to the CF Card
Save interval [Log. conditions] screen [Recording interval] [Monitoring interval]*
Saved channels [Channel] screen [Record] [Monitor]
* Measurement groups of the save monitoring interval are saved to the same file.
When the Recording interval and Monitoring interval, and the Record and Monitor settings are
set the same, measured data is saved to the PC and the CF card under the same conditions.
5.2 Explanation of Functions