Warning, Caution, Exemption from responsibility – Yokogawa PC-Based MX100 User Manual

Page 4: Software handling precautions

Advertising
background image

iii

IM MX100-01E

WARNING

Use the Correct Power Supply
Ensure that the source voltage matches the voltage of the power supply before turning ON the power.
Connect the Protective Grounding Terminal
Make sure to connect the protective grounding to prevent electric shock before turning ON the power.
Do Not Impair the Protective Grounding
Never cut off the internal or external protective earth wire or disconnect the wiring of the protective earth

terminal. Doing so invalidates the protective functions of the instrument and poses a potential shock hazard.

Do Not Operate with Defective Protective Grounding or Fuse
Do not operate the instrument if the protective earth or fuse might be defective. Make sure to check them

before operation.

Do Not Use in the Presence of Flammable Liquids, Vapors, and Dust
Do not use the instrument in the presence of flammable liquids, vapors, and dust. Operation in such

environments constitutes a safety hazard.

Do Not Remove Covers
The cover should be removed by YOKOGAWA’s qualified personnel only. Opening the cover is dangerous,

because some areas inside the instrument have high voltages.

Ground the Instrument before Making External Connections
Connect the protective grounding before connecting to the item under measurement or to an external control

unit.

Avoid Damage to the Protective Structure
Operating the instrument in a manner not described in this manual may damage its protective structure.

CAUTION

This instrument is a Class A product. Operation of this instrument in a residential area may cause radio

interference, in which case the user is required to take appropriate measures to correct the interference.

Exemption from Responsibility

• YOKOGAWA makes no warranties regarding the product except those stated in the WARRANTY that is

provided separately.

• YOKOGAWA assumes no liability to any party for any loss or damage, direct or indirect, caused by the user

or any unpredictable defect of the product.

Software Handling Precautions

• YOKOGAWA makes no warranties regarding the software accompanying this product except those stated in

the WARRANTY that is provided separately.

• Use the software on a single PC.
• You must purchase another copy of the software if you are to use the software on another PC.
• Copying the software for any purposes other than backup is strictly prohibited.
• Please store the original media containing the software in a safe place.
• Reverse engineering, such as decompiling of the software, is strictly prohibited.
• No portion of the software supplied by YOKOGAWA may be transferred, exchanged, sublet, or leased for use

by any third party without prior permission by YOKOGAWA.

Safety Precautions

Advertising