Thermo Fisher Scientific CyberScan CON 1500 - Manual (Page 10)

Instruction Manual CyberScan CON 1500
6
3.2. Display/ Keys
Overview of the meter screen display and function key layout.
Press std key to initiate
standardisation. Or press std
key at the ‘Standardize’ mode
allows you to exit and return to
measurement mode without
accepting the calibration.
Press mode to select uS,
kohm or TDS.
Press setup key to access
setup for configuration of meter
setting.
Press print key to print stored
data from memory or current
reading to a PC or printer
(depending on meter setup).
Press enter key to confirm
selection or change being
made.
Press ▲ key to increment
value or scroll up selection.
Press ▼ key to decrement
value or scroll down selection.
Press save key to store
displayed data into memory
Press view key to recall and
select memory location of
stored data
Press stdby key to start up or
put the meter in standby mode.