Thermo Fisher Scientific CyberScan CON 1500 User Manual
Page 37
Advertising
Instruction Manual CyberScan CON 1500
33
4.2.12 Setup Page 11.0: Set the Stop Bit
This setup page allows you to set the stop bit of the communication
protocol interface.
To Set Stop Bit
1. Access
the
Set Stop Bit setup page from any measurement mode
screen by pressing the setup key.
2. Use
the
▲/save or ▼/view keys to scroll until the screen display
as shown.
save
view
press
to set value
press
to accept
enter
press
to set value
press
to
accept
enter
Advertising