Thermo Fisher Scientific CyberScan CON 1500 - Manual (Page 61)

Instruction Manual CyberScan CON 1500
57
7.3. TDS Measurement
TDS readings will be in ppm unit. TDS factor can be selected from
the setup menu. (0.40 to 1.0). Default: 0.66.
1. Immerse the electrode into the sample solution. Stir moderately.
2. When the meter senses that the reading has stabilised, the stable
icon will appear under the reading. The reading may be recorded
at this time.
TDS
STABLE
press
press to select options
to store/ recall data
press to standardize
setup
save/ view
std