Thermo Fisher Scientific CyberScan CON 1500 - Manual (Page 12)

Instruction Manual CyberScan CON 1500
8
std
print
enter
save
view
4. CONDUCTIVITY OPERATION
4.1. Using Setup
The setup button brings you to the setup mode of the various
parameters. Press setup while in measurement to access to the
setup mode. The ▲/save or ▼/view keys allow you to scroll through
the setup pages available. While in the setup mode you may:
Press the std key at any time to return to the measurement
mode screen. Note new change will not be effected as no
confirmation is done.
Press the enter key to accept a change or selection of
desired option in the displayed parameter. The meter will
then return to the next setup
Press the ▲/save or ▼/view keys to scroll through
(increment and decrement setup pages respectively) the
remaining selection options available.