Thermo Fisher Scientific CyberScan CON 1500 - Manual (Page 24)

Instruction Manual CyberScan CON 1500
20
save view
3. Press the enter key to go into the Set the Auto Calibration Mode
(ACAL) setup.
4. Use the ▲/save or ▼/view keys to select the options of YES
(Auto) or NO (Manual) so as to configure the Calibration Mode to
Auto Calibration or Manual Calibration mode.
5. Press enter key to confirm selection OR press std to exit from
this page.
6. Continue to access other setup pages using ▲/save or ▼/view
keys OR press std key to exit from the setup and return to
measurement mode.