Thermo Fisher Scientific CyberScan CON 1500 - Manual (Page 27)

Instruction Manual CyberScan CON 1500
23
4.2.7 Setup Page 6.0: Set the TDS Factor. (Only
applicable in TDS mode)
This setup page allows you to set the TDS Factor in the range of
0.40 to 1.00. This option is only applicable during Total Dissolved
Solids mode of measurement.
1. Access the Set the TDS Factor setup page by pressing setup
during TDS measurement mode screen.
2. Use the ▲/save or ▼/view keys to scroll until the screen
displays as shown.
save view
press to set value
press to accept enter
TDS