Thermo Fisher Scientific CyberScan CON 1500 User Manual
Page 63
Instruction Manual CyberScan CON 1500
59
std
enter
9. PRINT DATA
9.1.
Printing Data
Depending on the print option in the meter setup, pressing the print
key allows you to print either current displayed reading or stored data
from meter to a PC or printing device via a RS232 communication
cable. Ensure that both meter and peripheral have the same
configuration in terms of baud rate, parity bit and stop bit. Please
check with the printer’s or peripheral’s manufacturers for details of
any specific settings of the device in use.
If there is an error message during operation, the screen displays
Err1. This indicates a communication error due to incorrect baud rate,
parity or stop bit being selected. Press std key to return to the
measurement mode.
)
Please refer to the CyberComm Pro Data Acquisition Software
Instruction Manual for details on installation use for communication to
the CyberScan CON 1500.