Thermo Fisher Scientific CyberScan CON 1500 - Manual (Page 42)

Instruction Manual CyberScan CON 1500
38
3. Press the enter key and use the ▲/save or ▼/view keys to
toggle between NO or YES. Select YES to clear all stored data
sets or NO if no change is to be made.
4. Press the enter key to confirm selection OR press std to exit
from this page.
5. Continue to access other setup pages using ▲/save or ▼/view
keys OR press std key to exit from the setup and return to
Measure mode.
Note:
When you press the enter key to confirm the clearing of memory,
“clear” will blink. Wait till it stops blinking before proceeding with the
next button press.
save view