Thermo Fisher Scientific CyberScan CON 1500 - Manual (Page 57)

Instruction Manual CyberScan CON 1500
53
6. TEMPERATURE CALIBRATION
If the temperature probe is not connected, the meter will display
25.0°C default icon on the secondary display. If the temperature
probe is connected, then meter will sense the actual temperature
and display the ATC icon.
From any measurement mode (Conductivity/ Resistivity / Total
Dissolved Solids):-
1. Access the temperature calibration setup page by pressing the
std key and then the mode key.
press to set value
press to accept enter