Thermo Fisher Scientific CyberScan CON 1500 - Manual (Page 29)

Instruction Manual CyberScan CON 1500
25
4.2.8 Setup Page 7.0: Set the Temperature Unit.
This setup page allows you to select unit of measure for Temperature
either in °C or °F.
To Select Temperature Unit
1. Access the Set the Temperature Unit menu during any
measurement mode screen by pressing the setup key.
2. Use
the ▲/save or ▼/view keys to scroll until the screen
displays as shown.
save view
save view
select
press to set value
press to accept enter