Thermo Fisher Scientific CyberScan CON 1500 - Manual (Page 23)

Instruction Manual CyberScan CON 1500
19
4.2.5 Setup Page 5.0: Set the Auto Calibration mode
(ACAL for Conductivity mode only)
This setup page allows you to select an auto calibration or a manual
calibration. This option is only applicable during conductivity mode of
measurement.
1. Access
the Set the Auto Calibration Mode (ACAL) setup page by
pressing setup during conductivity measurement mode screen.
2. Use the ▲/save or ▼/view keys to scroll until the screen
displays as shown.
save view
press to set value
press to accept enter