Thermo Fisher Scientific CyberScan CON 1500 - Manual (Page 33)

Instruction Manual CyberScan CON 1500
29
4.2.10 Setup Page 9.0: Set the Baud Rate
This setup page allows you to set the baud rate (bits per second) of
the communication protocol interface.
1. Access the Set the Baud Rate setup page during any
measurement mode screen by pressing the setup key.
2. Use
the ▲/save or ▼/view keys to scroll until the screen
displays as shown.
save view
Print
press to set value
press to accept enter