Clear buffer – Thermo Fisher Scientific CyberScan CON 1500 User Manual
Page 43
Advertising
Instruction Manual CyberScan CON 1500
39
4.2.15 Setup Page 14.0: Clear User calibration
This setup page allows you to clear the user calibrated values. This
option clears respective user calibration depends on the mode you
are in. (e.g.: If you access the setup menu from conductivity
measurement mode, then this option only clears the conductivity
user calibration)
1. Access the Clear User Calibration menu from measurement
mode screen by pressing the setup key.
2. Use the ▲/save or ▼/view keys to scroll until the screen
displays the clear BUFFER icon along with the previously buffer
values being standardised.
save
view
press
to set value
press
to accept
enter
clear
BUFFER
Advertising