Thermo Fisher Scientific CyberScan CON 1500 - Manual (Page 32)

Instruction Manual CyberScan CON 1500
28
3. Press the enter key to go into the Set the Stability Indicator
setup.
4. Use
the ▲/save or ▼/view keys to toggle between the options
of YES (enable stability indicator) and NO (disable stability
indicator).
save view
5. Press the enter key to confirm selection OR press std to exit
from this page.
6. Continue to access other setup pages using ▲/save or ▼/view
keys OR press std key to exit from the setup and return to
measurement mode.