Thermo Fisher Scientific CyberScan CON 1500 User Manual
Page 41
Advertising
Instruction Manual CyberScan CON 1500
37
4.2.14 Setup Page 13.0: Clear Stored Data
This setup page allows you to clear all stored data sets (from
previous measurements) in the meter’s memory for new data to be
stored. Note old data sets will be overwritten by any new data sets in
the event when the stored locations have exceeded.
To Clear Stored Data
1. Access the Clear Stored Data menu from any measurement
mode screen by pressing the setup key.
2. Use the ▲/save or ▼/view keys to scroll until the screen
displays as shown.
save
view
press
to set value
press
to accept
enter
press
to set value
press
to accept
enter
clear
Advertising