Thermo Fisher Scientific CyberScan CON 1500 - Manual (Page 31)

Instruction Manual CyberScan CON 1500
27
4.2.9 Setup Page 8.0: Set the Stability Indicator
This setup page allows you to activate/ de-activate the stability
indicator. Once activated, the STABLE icon appears on the display
when reading stabilises.
1. Access the Set the Stability Indicator setup page during any
measurement mode screen by pressing the setup key.
2. Use
the ▲/save or ▼/view keys to scroll until the screen
displays as shown.
save view
STABLE
press to set value
press to accept enter