Thermo Fisher Scientific CyberScan CON 1500 User Manual
Page 35
Advertising
![background image](/manuals/370649/35/background.png)
Instruction Manual CyberScan CON 1500
31
4.2.11 Setup Page 10.0: Set the Parity Bit
This setup page allows you to set the parity bit of the communication
protocol interface.
1. Access the Set Parity Bit setup page from any measurement
mode screen by pressing the setup key.
2. Use
the
▲/save or ▼/view keys to scroll until the screen display
as shown.
save
view
press
to set value
press
to accept
enter
press
to set value
press
to
accept
enter
Advertising