Thermo Fisher Scientific CyberScan CON 1500 - Manual (Page 30)

Instruction Manual CyberScan CON 1500
26
3. Press the enter key to go into the Set the Temperature Unit
setup page and view the current temperature unit.
4. Use the ▲/save or ▼/view key to choose either °C or °F.
select
°C
select
°F
save view
5. Press the enter key to confirm selection OR press std to exit
from this page.
6. Continue to access other setup pages using ▲/save or ▼/view
keys OR press std key to exit from the setup and return to
measurement mode.