Thermo Fisher Scientific CyberScan CON 1500 - Manual (Page 28)

Instruction Manual CyberScan CON 1500
24
press to set value
press to accept enter
TDS
save view
3. Press the enter key to go into the Set the TDS Factor setup and
view the current TDS Factor.
4. The TDS Factor of 0.40 to 1.00 can be set using the ▲/save or
▼/view keys.
5. Press the enter key to confirm selection OR press std to exit
from this page.
6. Continue to access other setup pages using ▲/save or ▼/view
keys OR press std key to exit from the setup and return to
measurement mode.