Store / restore feature, Data logging feature – Badger Meter M-Series M2000 User Manual
Page 54
Dial
Type
Unit Multiplier
(Resolution)
Display Digits
1
2
3
4
5
6
7
8
9
0
8 dial
10000
Not Applicable – Not enough display digits
1000
Not Applicable – Not enough display digits
100
1
2
3
4
5
6
7
8
0
0
10
1
2
3
4
5
6
7
8
0
1
1
2
3
4
5
6
7
8
0 1
1
2
3
4
5
6
7
8
0 01
1
2
3
4
5
6
7
8
0 001
1
2
3
4
5
6
7
8
0 0001
1
2
3
4
5
6
7
8
It is important to understand that the totalizers will be represented in a manner equivalent to an actual ADE register For
example, 1 USG on a 4 dial will be transmitted/displayed as “0001” If in bidirectional mode, –1 USG will be transmitted/
displayed as “9999”
The protocol type has two options:
•
V1 – meter provides single totalizer, Tn (bi-directional) or T1 (uni-directional),
•
V2 – meter provides extended information (For ORION SE or ORION ME)
The additional information provided by protocol type V2 is only accessible for specific models of the ADE transmitter (i e
ORION SE or ORION ME) The additional information of protocol type V2 includes, status information of the meter, meter
identification, a second totalizer reading (T+ or T2), relative flow rate (0…100%), and flow direction
STORE / RESTORE FEATURE
The Store/Restore feature is intended to save installation costs and reduce installation time This feature is also intended to
protect meter configuration and assure the operator that the meter is properly configured Over time and handling of the
meter, the meter configuration could change The Store/Restore feature allows the meter to be quickly set to the operator’s
original configuration Refer to the Store/Restore IOM for details on this feature
DATA LOGGING FEATURE
The Data Logging feature records three types of events to a memory token:
•
Totalizer/error events
•
Configuration change events
•
Startup events (power up, power down or reset events)
Each type of event is recorded into three separate files stored on the memory token These files are extracted using the
provided flow meter tool software over the RS232 communication link Refer to the Data Logging IOM for details on this
feature
M-Series® M2000 Electromagnetic Flow Meter
Page 54
August 2012