HP Color LaserJet 8550 Multifunction Printer series - Manual (Page 121)

EN
Additional basic copying features 121
To use the Interrupt mode:
1 Press I NTERRUPT on the copy module
control panel. The key will flash until
the current copy job stops.
After the current job has stopped, the
message
READY TO PERFORM
INTERRUPT JOB
appears. The light on
the I NTERRUPT key will be on.
Note
When a department ID and password
are required, the department ID and
password entry screen appear in the
touch panel display. Enter the
department ID and password using the
numeric keys, then press
C on the copy
module control panel.
2 Lift the cover and remove the
previous job’s original from the glass.
Place the original that you want to
copy on the glass. and lower the
cover. Enter the new copy settings as
required.
Note
Up to 100 copies can be made in the
Interrupt mode.
If I NTERRUPT is pressed again, the copy
settings will return to the copy settings
that were previously programmed.
1
2