HP Color LaserJet 8550 Multifunction Printer series - Manual (Page 76)

76 Chapter 3 Common copying tasks
EN
Placing the original on the glass
1 Lift the cover and place the original
face-down on the glass.
2 Align the corner of the original with
the “arrow” mark in the upper-left
corner of the glass.
Note
The size of the original determines
whether you should place the original
vertically (portrait) or horizontally
(landscape) on the glass. The position of
the original affects the Automatic Paper
Selection feature.
3 Lower the copy module cover and
press
S TART on the copy module
control panel.
CAUTION
When copying thick items, such as
books, do not press down hard on the
copy module cover. Doing so may
damage the glass and result in injury.
Note
When copying originals that are
composed of both color and
black-and-white, make copies of them by
separating the color originals from the
black-and-white originals or make copies
of them all using Full Color mode. (When
making copies in the Full Color mode,
black-and-white originals will be counted
as full-color copies.)
1
2
3