HP Color LaserJet 8550 Multifunction Printer series - Manual (Page 39)

EN
Touch panel display 39
Basic Features screen
The Basic Features screen is the default screen in the touch panel
display. From this screen, you can learn about or set up the features
described below.
Figure 10 Touch panel display—Basic Features screen
1 Message display. Displays the system status and operator
instructions.
2 Copy ratio display (Reduce, Direct, Enlarge). Displays the
copy ratio setting. For more information, see “Enlarging or
reducing originals” on page 80.
3 Reduce, Direct, Enlarge. Press to select the most suitable
setting for reducing or enlarging the image using preset ratios or
to perform a direct copy (resets the copy module to 1:1 copying).
For more information, see “Enlarging or reducing originals” on
page 80.
4 Zoom. Press to specify the copy ratios, selectable in 1%
increments, or to enlarge or reduce images in either the vertical
direction or the horizontal direction. For more information, see
“Enlarging or reducing originals” on page 80.
5 Paper quantity indicator. Displays the remaining quantity of
media in the selected tray.
6 Paper size display. Displays the media size in the selected tray.
For more information, see “Selecting the copy media size” on
page 65.
7 Paper Select. Press to select Automatic Paper Selection or a
specific tray. For more information, see “Using Automatic Paper
Selection” on page 65.
10
4
3
13
8
9
11
12
2 5
7
6 1