Additional features, Energy-saving features, Automatic functions – HP Color LaserJet 8550 Multifunction Printer series User Manual
Page 53: Energy-saving features automatic functions, Automatic start function
EN
Additional features 53
Additional features
Energy-saving features
The copy module features two energy-saving modes. These settings
lower the power consumption of the system while it is not in use. For
more information about energy-saving features, see the following
sections:
!
Energy Saver mode (see page 240)
!
Low-power mode (see page 272)
Automatic functions
The copy module features several automatic modes. These modes
allow you to set certain copy module functions to operate
automatically. For more information about automatic functions, see
the following sections:
!
Automatic Power-off Time function (see page 273)
!
Automatic Clear Time function (see page 269)
Automatic Start function
The Automatic Start function allows copying to automatically start
after the system has warmed up.
Automatic Start will occur:
!
after you have turned the power on
!
after you have canceled the Energy Saver mode
!
after you have cleared jammed copy media
Note
Automatic Start will not work if the system is processing a copy or
print job.