HP Color LaserJet 8550 Multifunction Printer series - Manual (Page 97)

EN
Enlarging or reducing originals 97
Copy ratio specification and required media sizes and
quantities
When making an enlarged copy with a specified copy ratio, the size of
the copy media and the number of sheets required for the resulting
copy depend on the copy ratio that is specified. The following table
shows typical copy ratios and the size and number of sheets of copy
media required. Use this table as a guide when determining the
desired copy ratio.
Note The values shown in the above table are only guidelines. The actual
values may be slightly different.
The resulting size after the printed copies have been cut and pasted
together will be slightly smaller than the size indicated in the above
table.
Typical copy ratios (Original size: Ledger/A3)
Copy Ratio Selected Paper Size Number of
Pages Total Size
200% Ledger/A3 9 559 by 864 mm
(22 by 34 in)
200% Letter/A4 15 559 by 864 mm
(22 by 34 in)
200% Letter-R/A4-R 12 559 by 864 mm
(22 by 34 in)
300% Ledger/A3 16 838 by 1295 mm
(33 by 51 in)
300% Letter/A4 28 838 by 1295 mm
(33 by 51 in)
300% Letter-R/A4-R 25 838 by 1295 mm
(33 by 51 in)
300% Ledger/A3 25 1117 by 1727 mm
(44 by 68 in)
400% Letter/A4 45 1117 by 1727 mm
(44 by 68 in)
400% Letter-R/A4-R 42 1117 by 1727 mm
(44 by 68 in)