HP Color LaserJet 8550 Multifunction Printer series - Manual (Page 269)

EN
Timer settings 269
Timer settings
Administration (Additional) Functions allows you change the factory
default settings that affect the energy saving and timer functions of
the copy module. These settings can be modified in the Timer
settings menu. Items in this menu include:
! Automatic Clear Time
! Automatic Energy Saver Time
! Low-power Mode Time
! Automatic Power-off Time
Note The system will not return to the
READY
state when a print job is sent
while an energy-saving mode is enabled.
Automatic Clear Time
The Automatic Clear Time setting allows you to set the copy module
to automatically return to Standard mode if the copy module is not
operated for a certain period of time. You can set Automatic Clear
Time from 0 to 9 minutes, in 1 minute increments.
Note The factory setting is set to 2 minutes.