HP Color LaserJet 8550 Multifunction Printer series - Manual (Page 272)

272 Chapter 8 Administration Functions
EN
Low-power mode
Use the Low-power function to set the copy module to automatically
switch to the Low-power mode if the copy module is not operated. You
can set the Low-power mode time from 10 to 50 minutes, or from 1 to
4 hours.
Note The factory setting is set to 1 hour.
To change Low-power mode
settings
1 Press the A DMINISTRATION F UNCTIONS
key, and select
TIMER SETTINGS
.
2 Press
LOW-POWER MODE TIME
in the
Timer Settings screen.
Press
▼ or ▲ to display each
screen.
3 Set the timer, using ▼ or ▲ , then
press
OK
.
Note
Set Low-power mode from 10 to 50
minutes in 10 minute increments, or from
1 to 4 hours in 1 hour increments.
The system will not return to the
READY
state when a print job is sent while
Low-power mode is enabled.
1
2
3