HP Color LaserJet 8550 Multifunction Printer series - Manual (Page 78)

78 Chapter 3 Common copying tasks
EN
The following types of originals can be used in the optional ADF:
! Original media weight: 50 to 105 g/m
2
(15 to 28-lb) bond
! Original media size: 11 by 17 in, Legal, Letter, Executive, A4, A3
(Executive-size originals must be placed vertically.)
! Original tray capacity:
11 by 17 in, Legal, A3: up to 25 sheets (80 g/m
2
or 20-lb bond)
Letter, Executive, A4: up to 50 sheets (80 g/m
2
or 20-lb bond)
When originals are placed in the optional ADF, the copy module will
automatically select the left output tray or the face-down output bin to
output copies, depending on the selected copy settings. To change
this setting, press
A DMINISTRATION FUNCTIONS and then press
CUSTOM
COMMON SETTINGS
(see “Copy Tray setting” on page 244).
Do not use the following types of originals in the optional ADF:
! originals with tears, large holes, or binding holes
! severely curled originals or originals with sharp folds
! originals that are paper clipped or stapled
! transparencies or other highly transparent originals
! other originals that may not feed smoothly
Note Color copies made with the copy module, or other originals that
contain large quantities of toner, may not feed properly through the
optional ADF. It is recommended that you use the glass when copying
these types of originals.
Note Check the condition of originals that have been repeatedly fed
through the optional ADF. When making several copies using the
same originals, the originals may become folded or wrinkled and may
not feed smoothly.
Note You cannot select the ACS (Automatic Color Selection) function when
making copies using Tray 1 and selecting Transparency, Heavy Paper
2, or Glossy Film for the copy media material. Press
F ULL C OLOR or
B LACK on the copy module control panel.