HP Color LaserJet 8550 Multifunction Printer series - Manual (Page 61)

EN
Loading media 61
Loading media in Tray 1 (stack bypass)
1 After placing your original on the
glass or in the ADF tray, open Tray 1
(stack bypass).
Note
When using large copy media, pull out
the tray extension.
2 Place sheets of copy media in Tray 1
with the side to be copied on facing
up.
The media size selection screen
automatically appears in the touch panel
display.
Note
Make sure that the height of the media
stack does not exceed the media-fill
mark.
3 Adjust the media-width guides to fit
the size of the copy media.
Note
If media loaded in Tray 1 is too loose or
tight, media jams can occur or copies
might misalign.
1
2
3