HP Color LaserJet 8550 Multifunction Printer series - Manual (Page 40)

40 Chapter 1 Product introduction
EN
Note
STACK BYPASS
refers to Tray 1.
8 Copy quantity indicator. Displays the number of copies to be
made. For more information, see “Making copies” on page 74.
9 Exposure control. Press the left-facing arrow (
̇
) for lighter
copies or press the right-facing arrow (
̈
) for darker copies. Press
A
(automatic) to select automatic exposure control. The copy
module automatically adjusts the copy exposure to the most
appropriate level for the original. For more information, see
“Adjusting copy exposure” on page 79.
10 Two-sided copying (duplexing). Press to select or cancel
duplexing. Make copies of both sides of the original or on both
sides of the copy media. Functionality differs depending on
installed options. For more information, see “Making double-sided
copies” on page 108.
11 Original type. Press to select the setting most suitable for the
type of original to be copied. For more information, see “Selecting
original type” on page 104.
12 Special Features. Press to display the Special Features screen
on the touch panel display. Use the Special Features mode to
select the desired copy image quality or the desired layout
settings. For more information, see “Special Features screen” on
page 41.
13 Setting confirmation. Press to check and confirm the selected
programmed job settings. This button is only visible when job
settings have been programmed. For more information, see
“Confirming, canceling, or changing the mode settings” on
page 126.