HP Color LaserJet 8550 Multifunction Printer series - Manual (Page 280)

280 Chapter 8 Administration Functions
EN
5
CORRECTLY PLACE THE TEST
PRINT ON THE GLASS
appears if the
Test Print 1 is not placed properly.
Place the test print correctly, then
press
OK
.
6 After Test Print 1 has been scanned,
remove it from the glass. Repeat
steps 3 - 5 for Test Print 2.
7 Repeat steps 3 - 5 for Test Print 3.
When scanning of Test Print 3 is
complete,
SCAN IS COMPLETE
(not
shown) is displayed for
approximately two seconds.
5
6
7