HP Color LaserJet 8550 Multifunction Printer series - Manual (Page 169)

EN
Blanking 169
Blanking
Blanking is the opposite of Framing. In Blanking mode, you can make
copies that exclude one or more designated areas from the original.
Areas are designated by using the numeric keys on the copy module
control panel.
There are several tasks you can perform in Blanking mode:
! Designate up to four image areas to be removed using the
numeric keys
! Edit an already defined image area
! Clear designated image areas
Each function is described in this section.
Figure 41 Exclude designated areas from the original so they do not
appear on the copy
Original
X2
X1
Y1
Y2
Designated areas
Copy