HP Color LaserJet 8550 Multifunction Printer series - Manual (Page 165)

EN
Framing 165
Designating image areas to copy
1 After placing your original on the
glass, press
SPECIAL FEATURES
.
2 Press
FRAMING/BLANKING
.
3 Designate the area to include on the
copy. Press
X1
,
Y1
,
X2
, and
Y2
to
enter the corresponding values using
the numeric keys. Press
OK
.
Note
You can enter values only in millimeters.
X1
: Length from the right edge of the
original to the right edge of the
designated area
X2
: Length from the right edge of the
original to the left edge of the designated
area
Y1
: Length from the top edge of the
original to the top edge of the designated
area
Y2
: Length from the top edge of the
original to the bottom edge of the
designated area
If you enter incorrect values, press the
C LEAR N UMERIC V ALUE key and reenter
the correct values.
The maximum values that can be
designated for
X1
and
X2
, and
Y1
and
Y2
are as follows:
!
X1
and
X2
= 432 mm (17.28 in)
!
Y1
and
Y2
= 297 mm (11.88 in)
1
2
3