HP Color LaserJet 8550 Multifunction Printer series - Manual (Page 51)

EN
Turning the copy module on 51
4 During the copy module warm-up
cycle, this screen appears on the
touch panel display. The message
PLEASE WAIT
is displayed in the
upper left hand corner.
Note
You can set your copy job settings while
the system is warming up. (See
“Automatic Start function” on page 53.)
After the warm-up cycle is complete, the
Basic Features screen appears with the
message
READY TO COPY
in the
upper-left hand corner. The copy module
is now ready to make copies and is in
Default mode (see page 31), which
means that the default settings are
activated.
The default copy settings are:
! Copy ratio: direct (100%)
! Copy paper selection: Automatic
Paper Selection
! Copy exposure: manual exposure
control
! Copy quantity: 1
! Original type: Text/Photo/Map
To change the default settings, see
“Changing Standard Settings” on
page 264.
Note
This screen may differ depending on the
optional accessories that have been
installed.
4