Editing an already defined image area – HP Color LaserJet 8550 Multifunction Printer series User Manual
Page 172
Advertising
172 Chapter 5 Image manipulation
EN
Editing an already defined image area
1
After you press
BLANKING
, press
REENTER AREA/ERASE
. When
multiple areas are designated, select
the button of the area to be edited,
then press
REENTER AREA/ERASE
.
2
Press the
X1
,
X2
,
Y1
, and
Y2
buttons
to be edited, then reenter the
corresponding values using the
numeric keys on the copy module
control panel. After reentering all the
values for the coordinates, press
OK
to complete area editing.
2
1
Advertising