HP Color LaserJet 8550 Multifunction Printer series - Manual (Page 58)

58 Chapter 3 Common copying tasks
EN
Tray 1,
continued Trans-
parencies**
Letter
A4
4 to 5 mils
(0.10 to 0.13
mm) thick Face up, with the
long edge
toward the printer
unit Fill to media-fill
mark on the
media-width
guides.
Envelopes
Double postcard
(JPOSTD)
B5
Commercial #10
C5
DL
Monarch
Maximum of
90 g/m
2
(24 lb)
bond
Face up, with the
short edge toward
the printer unit Approximately
10
Fill to media-fill
mark on the
media-width
guides.
Labels:
Letter
A4
— Face up, with
the long edge
toward the printer
unit Fill to media-fill
mark on the
media-width
guides.
When placing originals horizontally in the optional ADF, you must rotate media loaded in
Tray 1 for proper copying.
Media specifications (continued)
Tray
Location Media type &
size Media weight Orientation Maximum
capacity
* SS = single-sided printing; DS = double-sided printing; L&F = letterhead and preprinted
forms
** HP recommends using 5 mils (0.13 mm) thick transparencies with this system.