HP NetRAID-4M Controller - Manual (Page 114)

6-8
Command Line Interface User’s Guide
Executing: container list
Cluster Num Total Oth Stripe Scsi Partition
Dr Partner Label Type Size Ctr Size Usage C:ID:L Offset:Size
-- ------- ----- ----- ------ --- ------ ------ ------ -----------
F: 0 0 Volume 100MB NTFS 0:00:0 64.0KB: 100MB
Specifying a Cluster Partner
Some CLI commands require that you specify the cluster partner
(controlling or peer) on which you want to perform an operation. To
specify a cluster partner, use the command’s
/cluster_partner
or /partner switch.
Note: The /cluster_partner switch and /partner
switch have equivalent functionality, as follows.
/cluster_partner values: TRUE = controlling partner
FALSE = peer partner
/partner values: 0 = controlling partner
1 = peer partner
Table 6-2 lists the commands that have a /cluster_partner or
/partner switch.
Table 6-2. CLI Commands with /cluster_partner or /partner Switch
Command
/cluster_partner
switch /partner
switch
controller_battery_recondition x
controller rescan x
controller reset_scsi_channel x
controller resume_io x
controller set
automatic_rebuild
x
controller set container_verify x
controller
show_automatic_rebuild
x
controller show
container_verify
x
disk_set create x